I tried mine straight out of the jar and thinned with Mona Lisa. They didn’t cure either way.
If her thinning medium cures it might give the paint some curing properties, especially if the ratio has more thinning medium
I only mention it because I use my GHSP this way for lips… so I personally would test them that way as well.
That is what my bad ones are like too. Hers look thicker than mine.
They look like the Authentic Reborn paints to me, but I haven’t had trouble with AR curing (but I haven’t bought any new paints in at least 5 years.
I’m starting with the test, on a skya leg, the most intense middle color is directly from the jar, the one on the right is with thinner and the one on the left with thinking medium
I agree with you on the Authentic reborn paints, I love them. I’ve been using them for years
Any news?
So here are the results I’ll upload by color
First I did the test with a dry swab, then I wet it with water and this is what turned out
First Magenta 01
Flesh 04
I would consider your Magenta 01 and her Pyrrole red 05 not curing. And the flesh 04 has some that comes off… but that one might be okay… due to painting thinner when reborning.
Did anything come off with these ones?
Magenta 07
Please someone responds every time I upload a color just that way I can upload all the photos, the app only lets me reply 3 times then it crashes, so I can only upload 3 answers at a time, then someone should respond so I can upload more photos
Let’s see another color now
Yes, I’m going to try to upload more photos, I couldn’t upload anymore because the app only allows me to upload 3 answers at a time, then someone has to answer so I can upload more photos
Sap Green and Raw Umber
Lol~that’s why I replied w/ next color request
So in conclusion, In the first bake they did not cure magenta 01, pyrrole red 05, sap green, and a little of the raw umber when I wet the q-tip.
Flesh 07 There was only a little transfer but very little, I think it’s okay.
So the ones that healed well were flesh 04 and flesh 07 and magenta 07.
The best result I saw was with the thinning medium genesis vs thinner and direct from the jar.
Then make another bake, and this time I pass a damp cloth with water all over the surface, and notice that only a little of magenta 01 came out, but very little, I can bake for a third time today and we can see if this time the paintings stay in place
Did you bake with a thermometer in to check actual heat temp inside?
I don’t have a thermometer, but I put the oven to 130° C / 266° F (I think the conversion to farenheit is fine, in my country we use degrees Celsius) for 10 minutes.
I also use a different diluent to Monalisa which is the one I get in my country, I’ll upload a picture of that too.
Maybe I I have to get a thermometer.